Titanium Grade 4 Data sheet
ASTM F67 | ASTM B863 | ASTM B348 | ASTM B265 | ISO 5832-2 | 3.7065 | UNS R50700
Titanium Grade 4 has a higher gas content compared to other classic pure titanium grades, which results in higher strengths. The level of strength is comparable to that of classic stainless steels while offering a high strength-to-weight ratio and superior corrosion resistance. For example, Titanium Grade 4 has excellent corrosion resistance in brine and salt solutions, oxidizing media, alkaline media, organic acids and seawater.
Product forms for Titanium Grade 4 | ASTM F67
- 0,80 mm
- 1,00 mm
- 1,27 mm
- 1,57 mm
- 2,00 mm
- 3,00 mm
- 2,00 mm Ø
- 2,50 mm Ø
- 3,00 mm Ø
- 4,00 mm Ø
- 5,00 mm Ø
- 4,00 mm
- 5,00 mm
- 6,00 mm
- 8,00 mm
- 10,00 mm
- 12,00 mm
- 14,00 mm
- 16,00 mm
Areas of application for Titanium Grade 4 | ASTM F67
Chemical and maritime industries, electroplated frame contacts, anodizing equipment, electropolishing, vessel construction, frame construction, fasteners where applicable, medical devices, dental implants and surgical instruments.
Characteristics Titanium Grade 4 | ASTM F67
Chemical composition - limits in % (ASTM B348/863 + B265)
Ti | Rest |
Fe | max. 0,50 |
C | max. 0,08 |
O | max. 0,40 |
N | max. 0,05 |
H | max. 0,015 |
Physical constants and thermal properties
Density | 4,51g/cm² |
Melting point | 1670°C |
Beta transus temperature | 835 ± 4°C |
Thermal conductivity at 20°C | 17 W/ m°C |
Typical mechanical properties (at room temperature for ASTM B348/863)
Yield strength | min. 483 MPa |
Tensile strength | min. 550 MPa |
Elongation | min. 15% |
Typical mechanical properties (at room temperature for ASTM B265)
Yield strength | min. 483, max. 655 MPa |
Tensile strength | min. 550 MPa |
Elongation | min. 15% |
All information is subject to change without notice. The properties correspond to the material in the heading. They may vary for other specifications. Please contact us for more details.
Service
PDF Download
Material cutting:
S+D METALS is more than just a stockist. Save time and a processing step by letting S+D METALS cut your coils, sheets, plates, and round bars to size according to your specifications in S+D METALS own machine park or by one of our capable partners. All this within the shortest time possible.
More details can be found here
Your contact
Kevin Verhoeven
Sales Titanium and Titanium Alloys
+49 211 230 999-13
k.verhoeven@sd-metals.com
Ruben Frankenheim
Sales Assistant Titanium and Titanium Alloys
+49 211 230 999-23
r.frankenheim@sd-metals.com